Sunday, 7 June 2020

Professional Range

PNHB851 85" SoC (System on Chip) 4K Signage Monitor



Versatile High-definition Signage with Built-in SoC Controller

The PN-HB851 is a monitor you can trust to get your message out there. What sets it apart is a built-in system-on-a-chip (SoC) controller that allows it to deliver digital signage straight out of the box.

  • Built-in SoC (System on Chip)
  • Support for H.265/HEVC
  • SHARP Open Architecture Platform
  • Smart Connectivity
  • Autoplay with Media Player
  • Web-Based Signage
  • Bundled SHARP Content Distributor software
  • 4K LCD Panel
  • Flexible installation options
  • 16/7 Operation


Model Name




Landscape / Portrait / Face-up

LCD Panel

85-inch-class (84 9/16-inch [214.78 cm] diagonal) TFT LCD



Max. Resolution

3,840 × 2,160 pixels

Max. Display Colours (approx.)

1,070 million colours

Pixel Pitch (H × V)

0.488 × 0.488 mm


Max. Brightness*1

350 cd/m2

Contrast Ratio

5,000 : 1

Viewing Angle (H/V)

178°/178° (CR >= 10)

Active Screen Area (W × H)

1,872 × 1,053 mm (73 11/16" × 41 7/16")


Response Time

9.5 ms (grey to grey, avg.)


LED, direct lit

Computer Input


Analogue RGB (0.7 Vp-p) [75Ω], DisplayPort™ 1.2, HDMI™


Horizontal/vertical separation (TTL: positive/negative)

Plug & Play


Input Terminals*2

DisplayPort™ × 1, Mini D-sub 15-pin × 1, HDMI™ × 2, RS-232C × 1, 3.5 mm-diameter mini stereo jack × 1

Output Terminals*2

DisplayPort™ × 1, RS-232C × 1*3, 3.5 mm-diameter mini stereo jack × 1



Android 7.1


Hexa Core [Arm Cortex-A72 processor (dual core) + Arm Cortex-A53 processor (quad core)]


4 GB


32 GB

External Interface

LAN port (10Base-T/100Base-TX/1000Base-T), microSD card slot (microSD/microSDHC/microSDXC*4) × 1,
USB port (3.0-compliant) × 2, USB port (2.0-compliant) × 1

Wireless LAN

Compliant with IEEE802.11ac/n/a/g/b


Compliant with version 4.1 (A2DP/AVRCP/GATT/GAP/HID/HOGP)

Expansion Slot

12 V, 2.5 A (power supplied when expanding the functions with an optional part)

Speaker Output

10 W + 10 W


4 points, 600 × 400 mm pitch, M6 screw


Power Supply

100 V – 240 V AC, 50/60 Hz

Power Consumption*5

370 W


Environmental Conditions

Operating Temperature*6

0˚C to 40˚C

Operating Humidity

20% to 80% RH (no condensation)

Dimensions (W × D × H) (approx.) (display only)

1,902 × 89 × 1,083 mm


Weight (approx.)*5

48 kg


Main Accessories

AC power cord, remote control unit, battery (AAA size) × 2, CD-ROM, set-up manual, cable clamp (insertion type) × 2, cable clamp (stick-on type) × 3, USB flash drive/microSD card cover, USB flash drive/microSD card cover fixing screw, logo sticker, wireless LAN antenna × 2, RS-232C conversion cable × 1


*1 Brightness depends on input mode and other picture settings. Brightness level will decrease slightly over the lifetime of the product. Due to the physical limitations of the equipment, it is not possible to maintain a precisely constant level of brightness.

*2 Use a commercially available connection cable for PC and other video connections. *3 Requires the bundled RS-232C conversion cable. *4 exFAT is not supported. *5 Power consumption and weight may vary from specified levels. *6 When using the monitor lying flat on a surface (or when the monitor is tilted more than 20 degrees upward or downward from the perpendicular in relation to a level surface) the ambient temperature must be within the range of 0°C to 30°C. Temperature conditions may change when using the monitor together with optional equipment. In such cases, check the temperature conditions specified by the optional equipment. 

DisplayPort and the DisplayPort Compliance Logo are trademarks owned by the Video Electronics Standards Association in the United States and other countries.

HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.


Business Products Warranty Statement


This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below.

In the event of any defect arising in the equipment during the warranty period, such repairs should only be carried out by the Dealer from which the unit was originally purchased or a Service Centre approved by Sharp to service this type of equipment These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.

This warranty does not extend to defects or injuries caused by or resulting from causes not attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation, software, or any alterations made to the product which are not authorised by Sharp.

Please retain your sales documentation, as this should be produced to validate a warranty claim. This warranty is in addition to and in no way limits, varies or excludes any implied rights and remedies under any relevant legislation in the country of sale.

This warranty does not cover transportation to and from the Sharp Approved Service Centre. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. The repair of your goods may result in the loss of user generated data, please ensure that you have saved this data elsewhere prior to repair.

Australian customers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The criteria of a major failure is defined in the Australian Consumer Law. Should you require any assistance with a major failure please contact Sharp Customer Care.



Data Projector 24 months (excluding lamps and air filters)
Copier / Printer   6 months
Electronic Cash Registers 12 months
Facsimile 12 months
Information Display Panel 36 months
POS Terminals 12 months
AL Copier 12 months
Calculator 12 months
Personal Organiser 12 months

IMPORTANT NOTICE: This warranty applies to products sold in Australia & New Zealand